Husqvarna lawn mowers are a popular choice for many homeowners and business owners alike. But if you are a new owner, then you need to know the best oil to use for your Husqvarna lawn mower. Let's take a look at what the manufacturer suggests.
Husqvarna recommends using full-synthetic 10w-30 oil in their lawn mowers. This blend of oil is perfect for push-behind lawn mowers, tractors, and zero-turn mowers. Whether it's for residential or commercial use, this oil will provide the best engine protection.
No matter the engine, oil is vital to the proper functioning of your lawn mower. In this article, we will take a closer look at why this is the best oil for Husqvarna lawn mowers. In addition, we will answer other frequently asked questions about the maintenance schedule for Husqvarna mowers, so read on!
What Oil Should I Use In My Husqvarna Mower?
Husqvarna is known for manufacturing lawn mowers that provide high-level performance and power as well as long life. To ensure that your mower will remain operational for years to come, it is essential that you use the correct oil in your engine.
The manufacturer recommends using full-synthetic 10w-30 oil in all Husqvarna lawn mowers. This type of oil has been specifically designed to handle high temperatures and reduce engine wear.
Not only should this oil be in your lawn mower, but it is also recommended to be used in Husqvarna tractors. If you are a business owner, using the best oil possible is especially important.
This is because you will be operating the equipment for extended periods of time. The higher-quality oil can help prevent any issues with your engine, so it is important that you follow Husqvarna's recommendations.
Plus, most lawns are mowed during hot weather. If you don't use the right oil, then your mower can overheat and cause serious damage to the engine.
For residential work, you may be able to get away with using cheaper oil. However, your mower may not last as long or perform as well as it should.
No matter what type of mower you use, always make sure to follow your manufacturer's instructions when it comes to oiling and maintenance. Doing so will ensure that your Husqvarna lawn mower lasts for years without any issues.
How Often Should I Change My Oil In My Husqvarna Lawn Mower?
The oil change schedule for lawn mowers is different than for vehicles. For vehicles, you typically will change the oil by mileage or by so many months, whichever comes first.
Lawn mowers, on the other hand, go by hours or season. Husqvarna recommends changing the oil every 5 hours of continuous use or at least once per season.
You can either do the oil change yourself, or you can take it to a service center. Keep in mind that if you don't use synthetic oil, you may need to change the oil more often since it can break down faster.
If you are interested in buying a used Husqvarna lawn mower, then ask the previous owner for the maintenance records. This will give you an idea of how often the oil was changed during their ownership.
If you do decide to do the oil change yourself, then check the oil capacity of your mower. Every mower is different, and overfilling with oil can cause problems with your engine.
Lastly, adding oil isn't a substitute for changing the oil. You should still follow the same schedule for changing your oil even if you have to add some in-between changes.
How Much Does It Cost To Change The Oil In A Husqvarna Lawn Mower?
Before the next season starts, make sure to change your oil, air filter, and spark plug in order to keep your mower running smoothly. The cost will vary depending on the type of mower, the oil you use, and where you purchase it from.
On average, you can expect to pay $25-50 or more. This is a relatively inexpensive cost when you put it into perspective.
It is worth getting multiple price quotes and comparing them, as prices can vary between different service centers. If you are doing the oil change yourself, then you can save money by purchasing the oil and filter from a local store or online.
If you want to learn how to do the oil change yourself, then keep reading for the complete instructions.
How Do You Change The Oil In An Husqvarna Lawn Mower?
Follow the steps below to change the oil in your Husqvarna lawn mower:
1. Prepare Supplies
You will need the following supplies to properly change the oil:
- The proper amount of engine oil (refer to owners manual)
- Oil filter
- Drain pan
- Oil funnel
Once you have the supplies listed above, you can continue to the next step.
2. Prep The Mower
Next, you will need to prep the lawn mower for an oil change.
- First, run the engine until there is no fuel left.
- Disconnect the spark plug and move the spark plug wire so it won't come into contact with the spark plug.
- Using a towel, clean the oil cap and filler spout.
- Remove the oil cap and dipstick.
3. Remove The Old Oil
It may seem odd, but most lawn mowers have the old oil drained directly from the oil spout. When doing this, lay something down to avoid a mess.
- Tip the lawn mower on its side and drain the oil into the oil pan.
- Ensure all of the old oil is out of the lawn mower.
- Then remove the old oil filter.
- Add the new oil filter.
4. Add New Oil
Once all of the old oil is drained, it's time to add the new oil. Make sure that you are using the proper type and amount of oil for your lawn mower (refer to the owner's manual).
- Using an oil funnel, slowly pour the new oil into the filler spout.
- There will be a "max fill" line indicated on the oil cap, so make sure not to overfill.
- Put the oil cap and dipstick back in place.
- Tighten the oil cap until it is secure.
- Wipe off any excess oil.
- Replace the spark plug and reconnect the spark plug wire. It's important to ensure that the plug is tight before starting up the mower again.
- Start the lawn mower to ensure the oil is properly circulating.
If everything looks good, then be sure to dispose of the oil responsibly. Most automotive service centers and auto parts stores will accept used motor oil for proper disposal.
Remember, unless you just recently replaced the spark plug and air filter, you may want to consider replacing them as well.
Congratulations, you just successfully changed the oil in your Husqvarna lawn mower! Following these steps will ensure that your mower is running smoothly and that it will last for many seasons to come. Be sure to check the oil level again after a few hours of use and before storing it for the winter.
Do You Have To Use Husqvarna Oil?
Most dealers will recommend using their brand of oil for their machines. However, you don't necessarily have to use Husqvarna oil for your lawn mower.
You can use any type of oil that meets the engine requirements listed in the owner's manual. Just be sure to check what viscosity and grade are recommended for your specific model before making a purchase.
This is similar to vehicles when it comes to oil changes. For example, Lexus recommends using their Genuine Motor Oil, but you can still use other brands as long as they are within the correct viscosity and grade.
Should You Warm Up A Husqvarna Lawn Mower Before Changing The Oil?
It's always a good idea to warm up an engine before changing the oil. If you run your Husqvarna lawn mower for 10-15 minutes to change the oil, you will ensure all of the impurities are out of the oil, and it will empty easier.
This is also a great time to check the air filter, spark plug, and other engine components for any signs of wear or damage. If any parts need attention, you can address them before putting the mower away or using it again.
Changing the oil in a Husqvarna lawn mower is an essential part of proper maintenance. Be sure to double-check your lawn mowers owner's manual before changing the oil, as each model may have different requirements.
Made it to the end? Here are other articles you might find helpful: