Have you ever looked at your once-pristine lawn only to find it overrun with unsightly fungus?
It's a common problem that can be remedied with the right tools.
Introducing Scotts Disease Ex, a trusted fungicide that can help restore your lawn to its former glory.
But do you know when and how to apply it for maximum effectiveness? If not, don't worry!
It's recommended to apply Disease Ex before any visible signs of disease appear, typically in the spring when conditions are most favorable for disease growth.
Additionally, be on the lookout for fungus attacks following rainstorms. However, proper application is key.
So, keep reading to learn when and how to apply Disease Ex, and say goodbye to lawn diseases for good!
How To Properly Apply Disease Ex
Of course, if you have purchased Disease Ex, there is a problem with the potentially hazardous grass fungus. As a result, you should immediately start taking measures to protect your lawn.
If you will use Disease Ex, keep in mind that it cannot only address the problem of lawn fungus but can also alleviate your discomfort by efficiently combating a wide variety of other lawn diseases, including the following:
- Brown patch
- Yellow patch
- Stripe rust
- Red thread
- Necrotic ring spot
- Powdery mildew
- Pink patch
- Southern blight
Check the procedures that you must follow to use Scotts Disease Ex. The main feature of this fungicide is that you may use it not only as a treatment but also as a prophylactic measure.
If you suspect your lawn is under assault by the stubborn fungus, you can immediately treat it with Scotts Disease Ex to stop the fungus from spreading to your grass and destroying it.
1. Measure Your Lawn and Prepare the Right Amount of Disease Ex
To begin the process, you should take some measurements of your lawn and then calculate how much Scotts Disease Ex you will need. You will base it on the square footage of the lawn you have.
You can spread this fungicide across a lawn as large as 10,000 square feet or as small as 2,000 square feet.
If you use this helpful software, you may not only determine the precise dimensions of your lawn, but it can also provide you with a rough estimate of the number of fungicides your lawn needs.
2. Prepare the Spreader Machine
Prepare your spreader machine once you have determined the exact amount of Scotts Disease Ex your lawn requires to complete the task.
Remember that you can't use this fungicide in the same amount when treating and preventing fungal infections.
3. Spread The Disease Ex On The Grass
You will now need to spread the Disease Ex on the grass as soon as you have filled the spreader. You can disperse the Disease Ex in two stages if you want.
To begin, activate the edge guard and move it around the perimeter of the outside boundary.
Next, deactivate the edge guard and then begin spreading the product inside.
To completely cover the entire yard, you can walk the rows with the machine spreader following any of these two approaches:
- When pushing from one row to the next while utilizing a spreader, the distance between the spreader and the wheel tracks should be approximately five feet. It applies to a broadcast or rotary spreader. Moreover, a broadcast spreader disperses its coverage to a far larger area.
- If, on the other hand, you are operating a drop spreader, you should stride the spreader by creating rows beginning at the place where the last row ended. However, a drop spreader doesn't spread very far.
4. Remove Products Away From Any Hard Surface
It should be no surprise that the Disease Ex will come to the surface edge of the yard in some capacity.
So, after you have finished filling the lawn and notice some Disease Ex granules, it would be best to sweep them back to the grass.
How Long Does It Take For Disease Ex Take Effect?
You cannot simply haphazardly apply the Disease Ex product all over the grass and then sit back and wait to see the results.
You must wait at least twenty-four hours for a week or two. And you have to put it into practice correctly.
The action of the fungicide can control the lawn fungus for as long as four weeks if you administer it systemically.
Do You Need To Water The Lawn After Applying Disease Ex?
Yes! You need to water your lawn about 15 minutes after applying Disease Ex to activate it.
This helps the product penetrate the soil and reach the roots of your grass, where it can do the most good.
That will be sufficient if you have rainfall within a few hours of application. However, if you don't get any rain, you must water your lawn yourself.
One important tip to remember is to apply Disease Ex to dry grass if you wait to water it.
If you apply the product to wet grass and don't water it right away, it can stick to the blades of grass and become less effective.
So, ensure your grass is dry before applying and wait to water in if necessary.
How Frequently Should You Apply Disease Ex?
It is one of the significant concerns of Disease Ex users. According to the manufacturer, it would be best to reapply the fungicide at breaks ranging from 14 to 28 days.
If your lawn experiences a chronic disease state, you may need to shorten the time interval between applications.
Additionally, you may need to increase the rate at which you can apply them.
Lastly, it would help if you remembered that Scotts Disease Ex manufacturer highly suggests avoiding spreading more than 37 pounds of this fungicide per 1,000 square feet over a year.
Can You Immediately Apply Fertilizer After Using Disease Ex?
As the manufacturer suggests, it would be best not to apply fertilizers simultaneously using the Disease Ex or even after that. If you do that, expect that it will destroy the grass.
Waiting for at least two days is ideal before you can freely apply fertilizer to your grass.
How To Avoid Grass And Lawn Fungus
How you feed fertilizer, mow, and water your lawn might contribute to its resistance to fungal diseases.
If you have doubts about lawn maintenance, we suggest following the tips and guidelines below for a healthy and lively lawn.
Fungicide Is Important For Lawns
Proper Watering Is Important
When the grass blades are often damp, it is more susceptible to infection from various diseases. So, to control the wetness of the blades, we suggest watering only if the lawn requires it.
In addition, it is suggested to do the watering process between 6 and 10 in the morning. This technique will give your lawn adequate time to dry up the whole day.
Moreover, remember not to water your grass in the afternoon or evening. Because if you do, you will allow the fungal diseases to attack your lawn since it will be completely wet for the whole night.
Immediately Controlling Fungus Is Important
Keeping lawn diseases at bay is much simpler than treating them once they appear.
So, if you want to guard your lawn against fungi, it would be best to understand and learn the fundamental principles to keep them green and healthy.
Is Lawn Mowing Necessary?
Mowing your lawn is highly advisable, and you must do it correctly. There is an ideal height of grass that you should know to prevent infection from occurring on it.
Mow your grass at a height of three to four inches. It is what gardeners suggest for most grass varieties. Note that mowing your lawn is as important as watering and feeding them with fertilizer.
How Often To Fertilize Your Grass?
If your grass lacks nutrients, it will grow weak and become disease-resistant. So, it would be best to feed them with fertilizer. Utilize Scotts Turf Builder Lawn Foods. And you have to feed them with it at least four times a year.
Healthy grass has better protection against fungal diseases.
It's A Wrap!
Now that you know when and how to apply Disease Ex, it is time to use it and free your lawn from any fungal disease.
If you can execute the process correctly, you can swiftly eliminate the infection in your grass.
Also, extend your effort and patience for this matter since this requires time and an appropriate approach.
If you still have additional concerns, please comment below.
And if you wish to continue reading, you can check these posts out!