How To Adjust Steering On Husqvarna Zero Turn

One of a zero-turn mower's most important features is steering. Many property owners adore their Husqvarna Zero Turn's easy maneuverability and smooth steering when maintaining your lawn. However, they find it difficult to adjust the mower's steering while it is veering off course. Fortunately, we are here to help you adjust the steering on your Husqvarna Zero Turn and to share what we have learned about the mower.

The Husqvarna Zero Turn's steering can be adjusted by following these easy steps;

  1. Turn off your zero-turn mower
  2. Check tire pressure
  3. Adjusting steering lever height
  4. Adjust the steering lever width
  5. Adjust the steering lever reach

This article outlines how to adjust the steering on a Husqvarna Zero Turn. We will also go through common steering issues, its lifespan, and some maintenance advice to make it last longer. Let's get started!

How To Adjust The Steering On Your Husqvarna Zero Turn Mower

Your steering may also be directly altered by adjusting the levers on your zero-turn mower. Lever misalignment can result in steering problems, which will cause you to mow erratically. You can adjust the lever several ways to improve your comfort level while using the equipment. 

Riding on a zero turn lawn mower

Step 1- Turn Off Your Zero Turn Mower

Make sure your zero-turn mower is turned off and has no moving parts before you begin the adjusting process. Instead of leaving your Husqvarna Zero Turn out on the lawn where the ground can be uneven, park it on a flat surface.

Step 2-Check Tire Pressure

Check the front and rear tires of your zero-turn mower for any damage, and ensure all tires are inflated to the same pressure. Otherwise, use a tire inflator to pump air into the underinflated tire.

Never let the tire pressure on your zero-turn vehicle reach its maximum, and avoid adding air to any tire that is already at the correct pressure. If you exceed the maximum level, especially when mowing on a slick or wet surface, your handling will be affected.

Step 3-Adjusting Steering Lever Height

Locate the bolts that secure the levers. The two bolts that attach the levers are located at the sides. Unscrew the nuts with a wrench and set the height of the levers to a position that is comfortable for you. Next, reinstall and tighten the bolts.

Click to see this wrench on Amazon.

Step 4-Adjust The Steering Lever Width

Loosen the mounting hardware on your lap bars' lower control arm. Loosen the bolt and locate the spacer to adjust the lever's width. With the bolt on the spacer, adjust the lever to the ideal position. Attach the mounting hardware back, then tighten the bolt.

Step 5-Adjust The Steering Lever Reach

Identifying the mounting hardware on the upper steering arm will allow you to modify the lever reach. Remove the bolts holding the mounting hardware in place, then, based on how comfortable it is for you, move the steering ahead, away from you, or back towards you. For your steering to be stable, tighten the mounting bolts.

Watch this video for more details.

What Are the Most Common Steering Problems With Your Husqvarna Zero Turn?

If the connecting components, such as the deck and the tires, have a problem, it may not be easy to drive the Husqvarna zero-turn mower smoothly. Below is a list of steering issues; learn how to fix these with the explanations provided.

Lawn mower zero turn on a store display for testing

Insufficient Tire Pressure

Depending on how often your mower is used, the tires' pressure can rise or fall. It is difficult to freely steer the mower when the tire pressure is out of balance. As recommended by Husqvarna, check the tire pressure and maintain it at the same level in all the tires.

Zero Turn Tracking Not Adjusted Properly

When one tire on the mower moves quickly while the other moves slowly, the mower will continue to pull toward the quicker side, making steering difficult. To adjust the rotational speed of the tire, change the speed of the adjustment rivets.

Wobbly Components Of The Steering System

The washers, gear assembly, and bushings all deteriorate with time. Frequent usage weakens the steering mechanism. Closely examine each component and replace if needed.

Malfunctioning Zero Turn Dampers

It will be difficult to maneuver the mower from one side to the other if the dampers are broken. Examine the dampers and replace them if necessary.

What Are Some Maintenance Tips For Your Husqvarna Zero Turn?

Garden yellow new tractor mower

The greatest investment you make in your yard may be a Husqvarna zero-turn mower. Like other investments, it's crucial to ensure you perform the suggested maintenance to keep it functioning smoothly. To help you keep your Husqvarna zero-turn mower in good condition, we've provided some maintenance schedule tips. 

Sharpen The Blades 

Better cut quality and less need to mow the same area repeatedly are two benefits of sharp mower blades. This not only saves time but also ensures that your zero-turn mower won't suffer equipment damage from the unbalanced blades.

Blade sharpening may be done by anyone with the right equipment, but you might want to take your equipment to a service center for this maintenance advice.

The flat file can be used to sharpen the blade of your lawnmower.

Click to see this sharpening stone on Amazon. 

Change The Oil

Open gas tank with stabilizer fuel additive being put in before storage

The engine life of your zero-turn lawn mower can be greatly extended with just a small outlay for oil changes. Follow the engine manual's recommended oil change intervals consistently.

The number of hours you use the mower determines how often the oil needs to be changed. Change it on the safe side if you can't recall how many hours have passed when you're using it. To check the oil level, use a dipstick.

Check The Air Filter

One of the simplest maintenance procedures for a functional zero-turn lawn mower is checking and replacing the air filter. To find out how to inspect the air filter, consult your user handbook. Replace the air filter with a new one if it is dirty or damaged. It can also be cleaned using an air compressor and a soft brush.

Click to see this soft brush on Amazon.

Check The Mower Belts

You can become stuck in your lawn if your mower belt fails. Always check your belts periodically for deterioration or cracks. Make sure to replace the mower belts if they develop any indications of wear before making your stripes.

Check The Mower Deck

The mower may also be damaged, the cut quality may be affected, and you may permanently damage your lawn if the deck of your zero-turn mower is overloaded with grass cuttings, debris, and trash. The mower spindles and blades can become damaged and need to be replaced because the grass, dirt, and debris contain moisture that can corrode the bare metal. 

Cleaning the equipment after each use is strongly advised to prevent this corrosion problem.

Check The Spark Plug

A mower's spark plug provides the initial spark to ignite the fuel mixture for an explosion. The spark plug explosion contributes to the machine's ability to produce power.

Therefore, remember to change the spark plug on schedule if you are worried about the lifespan of your zero-turn mower. The most important part of any machine is the spark plug, and if it breaks down, you will have a lot to be worried about since the engine will not be able to start.

A poor spark plug will cause the engine to misfire, lower power output, and significantly affect fuel efficiency. If neglected for a long time, a bad spark plug could cause an out-of-order lawn mower.

How Long Does A Zero Turn Mower Last?

Riding lawn mower parks outside barn, How To Adjust Steering On Husqvarna Zero Turn

How well you take care of a zero-turn mower will determine how long it lasts.

Your lawn mower can last up to 2,500 to 5,000 hours if you take care of them and change its oil regularly. However, if you use the lawn mower roughly, it won't matter how well-made it is or how much money you spend on it—it will break down sooner than it should.

Conclusion

It's simple to make adjustments to your Husqvarna Zero Turn. A wrench is all you need to deal with nuts and bolts; no further tools are needed. Steering adjustments can be mostly altered based on your comfort level or when your mower has trouble following the correct mowing route. Nevertheless, you will greatly benefit from the brief and simple steps outlined.

If you found this post helpful, check out these related articles:

What Oil Is Best For A Husqvarna Mower?

How To Keep Lawn Mower Tires From Going Flat Or Leaking

Leave a Reply

Your email address will not be published. Required fields are marked *